ISSN: 2222-6990
Open access
Building Information Modelling (BIM) is a detailed process of designing and building in construction industry collaboratively by using one integrated system generated by computer rather than separate the work by separate drawings. On the other hand, it provides a large amount of benefit in terms of cost saving and time, much better accuracy in estimation and reducing arithmetical error and any amendment due to loss of information. Existing studies have determined the quantity surveying firm readiness due to BIM implementation in Malaysia. However, this research is aimed to establish the status of BIM application in quantity surveying firms for quality improvement, especially in current practices by unveiling the present findings. The study objectives are to find out the importance of BIM in the construction industry, to investigate the challenges faced by quantity surveying firms in the implementation of BIM and to suggest a suitable solution for quality improvement to quantity surveying firms. The data collection was conducted by using the quantitative method, which is through the questionnaire survey. The scope is narrowed down to quantity surveying firms that registered in Board of Quantity Surveyors Malaysia at Northern Region of Peninsular Malaysia only. The findings of this study revealed that quantity surveying firms had difficulties in implementing BIM due to lack of capability and complexity in using BIM software itself such as Cubicost by Glodon. It also revealed difficulties in collaboration during implementing BIM software which causes the firms to decline from using BIM. Hopefully, this research will help the quantity surveying firms by giving a clear exposure on the BIM implementation and how to use it in their current practices for quality improvement.
Arayici, Y., Egbu, C., & Coates, P. (2012). Building Information Modelling (BIM) Implementation and Remote Construction Projects: Issues, Challenges, and Critiques. Journal of Information Technology in Construction, 17(May), 75–92. Retrieved from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.398.9853&rep=rep1&type=pdf
Babbie, E. R. (2009). The Practice of Social Research: Twelfth Edition (12th ed.). Belmont: Cengage Learning.
Becerik-gerber, B., Gerber, D. J., Ku, K., & Tech, V. (2011). the of Technological Innovation in Architecture, Engineering, and Construction Education: Integrating Recent Trends Into the Curricula, 16(February), 411–432.
Bliss, A. (2017). 5 Ways BIM 360 Docs Reduces Construction Rework. Retrieved March 24, 2018, from https://connect.bim360.autodesk.com/bim-360-docs-reduces-rework
Buncio, A. D. (2017). Lowering Costs with Building Information Modeling. Retrieved March 24, 2018, from https://www.viatechnik.com/blog/lowering-costs-with-building-information-modeling/
Crowley, C. (2013). Identifying opportunities for Quantity Surveyors to enhance and expand the traditional quantity modelling, CITA BIM Gathering 2013, 1–7.
eConstruct. (2017). e-Construct Building Information Modeling Magazine. (D. I. E. Ismail, Ed.) (1st ed.). Kuala Lumpur: myBIM Centre.
Gerber, D. J., Khashe, S., & Smith, I. F. C. (2015). Surveying the Evolution of Computing in Architecture, Engineering, and Construction Education. Journal of Computing in Civil Engineering, 29(5), 04014060. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000361
Henderson, L., & Jordan, N. L. (2009). A Modest Proposal for a Transdisciplinary Curriculum for the Design, Construction, Management and Maintenance of Architecture. Journal of Building Information Modeling, (1), 35–37.
Ikhsan, S. O. S. S. (2019). Opening Speech BIM Day 2019. CIDB Malaysia (Vol. 8). https://doi.org/10.22201/fq.18708404e.2004.3.66178
Kumar, S. S., & Cheng, J. C. P. (2015). A BIM-based automated site layout planning framework for congested construction sites. Automation in Construction, 59, 24–37. https://doi.org/10.1016/j.autcon.2015.07.008
Lee, G., & Borrmann, A. (2020). BIM policy and management. Construction Management and Economics, 38(5), 413–419. https://doi.org/10.1080/01446193.2020.1726979
Matipa, W. M., Cunningham, P., Naik, B. (2010). Assessing the impact of new rules of cost planning on Building Information Model (BIM) pertinent to quantity surveying practice, 26th Annual ARCOM Conference: Association of Researchers in Construction Management, 6th-8th September, United Kingdom, 625–632
Memon, A. H., Rahman, I. A., Memon, I., & Azman, N. I. A. (2014). BIM in Malaysian construction industry: Status, advantages, barriers and strategies to enhance the implementation level. Research Journal of Applied Sciences, Engineering and Technology, 8(5). https://doi.org/10.19026/rjaset.8.1012
Olsen, D., & Taylor, J. M. (2017). Quantity Take-Off Using Building Information Modeling (BIM), and Its Limiting Factors. Procedia Engineering, 196(June), 1098–1105. https://doi.org/10.1016/j.proeng.2017.08.067
Olsen, D., & Taylor, J. M. (2017). Quantity Take-Off Using Building Information Modeling (BIM), and Its Limiting Factors. Procedia Engineering, 196(June), 1098–1105. https://doi.org/10.1016/j.proeng.2017.08.067
Park, C. S., Lee, D. Y., Kwon, O. S., & Wang, X. (2013). A framework for proactive construction defect management using BIM, augmented reality and ontology-based data collection template. Automation in Construction, 33, 61–71.
https://doi.org/10.1016/j.autcon.2012.09.010
Poirier, E. A., Staub-French, S., & Forgues, D. (2015). Measuring the impact of BIM on labor productivity in a small specialty contracting enterprise through action-research. Automation in Construction, 58, 74–84. https://doi.org/10.1016/j.autcon.2015.07.002
Saunders, M., Lewis, P., & Thornhill, A. (2016). Research methods for business students (7th Ed.). Pearson Education Limited.
The Editor. (2015). The rise of the BIM Consultant. Retrieved May 25, 2017, from http://www.bimireland.ie/2015/10/16/the-rise-of-the-bim-consultant/#prettyPhoto
Vanessa Quirk. (2012). A Brief History of BIM. Retrieved May 23, 2017, from http://www.archdaily.com/302490/a-brief-history-of-bim/
Williams, A., Sher, W., Dosen, C. S. A., & Pitt, B. (2009). Construction education in Australia?: a review of learning and teaching challenges and opportunities. Construction.
Wijayakumar, M., Jayasena, H. S. (2013). Automation of BIM quantity take-off to suit QS’s requirements, The Second World Construction Symposium 2013: Socio-Economic Sustainability in Construction, 14th-15th June, Colombo, Sri Lanka, 70–80.
Wong, P. F., Salleh, H., Rahim, F. A. (2014). The relationship of Building Information Modeling (BIM) capability in quantity surveying practice and project performance, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 8, 1031–1036.
In-Text Citation: (Mamat et al., 2022)
To Cite this Article: Mamat, M. E., Mamter, S., Syazwan, M., Abdullah, M. N., Shuib, M. N., & Ab.Wahid, A. M. (2022). The Application of Building Information Modeling (BIM) in Quantity Surveying Firm Towards Quality Improvement. International Journal of Academic Research in Business and Social Sciences, 12(10), 2887 – 2894.
Copyright: © 2022 The Author(s)
Published by Human Resource Management Academic Research Society (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non0-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode