ISSN: 2226-6348
Open access
Structural Concrete and Steel Design(ECSXXX) and Civil Engineering Design Project(ECSYYY) are two (2) compulsory subjects in most studies of Diploma of Civil Engineering in Malaysia. These subjects have been associated with each other as the structural concrete and steel design has carried the theory and fundamentals to the design project subject. ECSXXX which indicates the study on the reinforced concrete of beam, slabs, column, and foundation. Complementary to these, the design of steel beam, column and connections are also included in the syllabus. All the topics will imply in the subject of ECSYYY, whereby students are required to design manually and software for a two-story house. The previous study plan for Diploma Civil Engineering in UiTM Johor was designed that the subject of ECSXXX was under semester 5 and the subject ECSYYY was at semester 6. However, to fulfill the requirement of the Engineering Technology Accreditation Council (ETAC), current study plan was established which combined the two subjects in semester 5. As a result, a single semester 6 will be allocated for the Industrial Training. Due to this system, student attainment based on grade and PO should be analysed. Data recorded all students pass the minimum indicator for PO2,P03,PO4,PO5,PO8 and PO10 using i-Ras. Hence, correlation of overlapping PO such as PO3 and PO4 were analysed for betterment of continual quality improvement can be done in future. Students scored better grades for ECSYYY compared to ECSXXX.
Abdeljaber, H. A., & Ahmad, S. (2017). Program Outcomes Assessment Method for Multi-Academic Accreditation Bodies: Computer Science Program as a Case Study. International Journal of Emerging Technologies in Learning, 12(5).
Bhuyan, M. H. (2021). Assessing ‘lifelong learning’through the capstone design project of BSc in EEE Programme. International Journal of Learning and Teaching, 13(1), 13-31.
Damit, M. A. A., Omar, M. K., & Puad, M. H. M. (2021). Issues and challenges of outcome-based education (OBE) implementation among Malaysian vocational college teachers. International Journal of Academic Research in Business and Social Sciences, 11(3), 197-211.
Hassan, N., Zubir, H. A., Mohzan, M. A. M., Halil, N. A., & Jamil, M. (2021). Washback On Learning: The Experience Of Outcome-Based Assessment In A Higher Learning Institution In Malaysia. PalArch's Journal of Archaeology of Egypt/Egyptology, 18(4), 4308-3425.
Isa, C. M. M., Joseph, E. O., Saman, H. M., Jan, J., Tahir, W., & Mukri, M. (2019). Attainment of Program Outcomes under Psychomotor Domain for Civil Engineering Undergraduate Students. International Journal of Academic Research in Business and Social Sciences, 9(13), 107-122.
Jadhav, M. R., Kakade, A. B., Jagtap, S. R., & Patil, M. S. (2020). Impact assessment of outcome based approach in engineering education in India. Procedia Computer Science, 172, 791-796.
Jadhav, A. A., Suryawanshi, D. A., Ahankari, S. S., & Zope, S. B. (2022). A technology-enabled assessment and attainment of desirable competencies. Education for Chemical Engineers, 39, 67-83.
Mohammad, S., Kassim, A., & Mohd-Yusof, K. (2012). Addressing the issues and challenges in ensuring quality engineering graduates using the outcome based approach (OBA): The UTM Experience. ASEAN Journal of Engineering Education, 1(1).
Osman, S. A., Badaruzzaman, W. H. W., Hamid, R., Taib, K. A., & Rashid, A. K. (2011). The Program Outcomes Achievement for Basic Reinforced Concrete Design Course between Two Different Sessions. Procedia-Social and Behavioral Sciences, 18, 260-265.
Rahmat, R. A. A. O. (2011). Achievement of Program Outcomes Using Assessment Plan. Procedia-Social and Behavioral Sciences, 18, 87-93.
Rajak, A., Shrivastava, A., & Tripathi, A. (2019). An approach to evaluate program outcomes and program educational objectives through direct and indirect assessment tools. International Journal of Emerging Technologies in Learning (iJET), 14(23), 85-97.
Rajaee, N., Husin, M. H., Sabri, M. F. M., Salleh, D. N. S. D. A., & Yew, N. L. (2013). Towards Accreditation in Engineering Education: A Review on Learning Tools, Pedagogies and Assessment Procedures in Department of Electronic Engineering, UNIMAS. UNIMAS.
Standard of Engineering Technician Education Programme Accreditation. (2020) ETAC, Malaysia
Wee Lee, S., Jamal, M. H. B., Hasbullah, M. A. B., Ibrahim, M. M. J. B., Mohammad, S. N. B., & Haron, H. A. B. (2021). Forensic Investigation on the High Failure Rate of Civil Engineering Solid Mechanics Course. Asian Journal of University Education, 17(2), 227-235.
In-Text Citation: (Noh et al., 2023)
To Cite this Article: Noh, N. B., Yusof, A. I. Bin, Wee, L. S., Puaad, M. B. F. B. M., & Noor, N. I. B. M. (2023). Correlation of Student Attainment for Civil Engineering Design Project and Structural Concrete and Steel Design for Undergraduate Students in Concurrent Semester. International Journal of Academic Research in Progressive Education and Development, 12(1), 164–173.
Copyright: © 2023 The Author(s)
Published by HRMARS (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode