ISSN: 2226-6348
Open access
This paper is presents the weight system for dynamic load with calibration for stingless bee. The calibration must be done first to get the minimum and maximum scale weight or resolution weight scale. In this study, weight sensor that have been chosen is load cell with maximum scale weight is 20 kilogram (kg). The calibration have been done by using formula y = mx + b where y is the raw value ADC from weight sensor, x is measured weight, b is the intersection but with no weight or value ADC after empty weight and m is multiplier or scale factor. From the calibration, the weight will be obtained. The equipment that have been used are Arduino UNO, load cell sensor, SD-Card Adapter.
Cecchi, S., Spinsante, S., Terenzi, A., & Orcioni, S. (2020). A smart sensor-based measurement system for advanced bee hive monitoring. Sensors (Switzerland), 20(9). https://doi.org/10.3390/s20092726
Cecchi, S., Terenzi, A., Orcioni, S., Spinsante, S., Primiani, M. V., Moglie, F., Ruschioni, S., Mattei, C., Riolo, P., & Isidoro, N. (2019). Multi-sensor platform for real time measurements of honey bee hive parameters. IOP Conference Series: Earth and Environmental Science, 275(1), 0–7. https://doi.org/10.1088/1755-1315/275/1/012016
Riyanti, K. K. P., Kakaravada, I., & Ahmed, A. A. (2022). An Automatic Load Detector Design to Determine the Strength of Pedestrian Bridges Using Load Cell Sensor Based on Arduino. Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics, 4(1), 15–22. https://doi.org/10.35882/ijeeemi.v4i1.3
Anuar, K. N. H., Yunus, A. M. M., Baharuddin, M. A., Sahlan, S., Abid, A., Ramli, M. M., Abu Amin, A. M., & Lotpi, M. Z. F. (2019). IoT Platform for Precision Stingless Bee Farming. 2019 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2019 - Proceedings, June, 225–229. https://doi.org/10.1109/I2CACIS.2019.8825089
Kviesis, A., Zacepins, A., Komasilovs, V., Paramita, A. M., & Muhammad, F. R. (2020). Temperature and Weight Monitoring of the Apis Cerana Bee Colony Indonesia. Rural Sustainability Research, 44(339), 54–60. https://doi.org/10.2478/plua-2020-0017
Lewis, T., Engineering, C., Oliver, J., & Lewis, B. (2014). Beehive Monitor. June, 1–22. Michels, M. (2011). A Beehive Monitoring System Incorporating Optical Flow as a Source of
Information. 30. http://www.inf.fu-berlin.de/inst/ag-
ki/rojas_home/documents/Betreute_Arbeiten/Bachelorarbeit-Michels.pdf
Rqh, V. I. R. U., Wkdw, X., Ploolrqv, U., Hxurv, R. I., Zklfk, M., Juhdw, K. D., Ydoxh, P., Vlqfh, I., Lpsruwdqfh, W. K. H., Krqh, R. I., & Lv, E. (2017). An Internet of Things- Based Weight Monitoring System for Honey. 11(6), 478–482.
Terenzi, A., Cecchi, S., Spinsante, S., Orcioni, S., & Piazza, F. (2019). Real-Time System Implementation for Bee Hives Weight Measurement. 2019 IEEE International Workshop
on Metrology for Agriculture and Forestry, MetroAgriFor 2019 - Proceedings, 2(1), 231–
236. https://doi.org/10.1109/MetroAgriFor.2019.8909252
Ud, I. N., & Tani, P. (N.D.). The Digital Weight Scale Of Iot System Using Load Cell Sensor.
2–9.
In-Text Citation: (Jani et al., 2023)
To Cite this Article: Jani, M. M. B. M., H., M. A., Ja’afar, H. B., & Rustam, I. (2023). Weight System Calibration of Dynamic Load for Stingless Bee Application. International Journal of Academic Research in Progressive Education and Development, 12(1), 255–263.
Copyright: © 2023 The Author(s)
Published by HRMARS (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode