ISSN: 2222-6990
Open access
Nowadays, in Malaysia, one of the country's challenges is the improper management and disposal of solid waste. The leading sector that generates most of the solid waste in Malaysia is the agricultural sector from oil palm fibre, similar to oil palm trunk fibre, which is also be used as an additive in producing foamed concrete (FC). However, FC presents a weakness in tension, which can be reduced by adding an adequate volume of waste biomass by-product such as oil palm trunk (OPT) fibre. Accordingly, this study was undertaken to investigate the potential of utilising OPT fibre as a reinforcement in FC. There were four different volume fractions of OPT fibre: 0.15%, 0.30%, 0.45%, and 0.60% used as an additive to the FC mix. Two densities, 600 kg/m3 and 1200 kg/m3, were cast and tested. All FC specimens were then prepared and left to cure and exposed to the elements for 7, 28, and 56 days. In this study, mechanical properties were examined. The results showed that the addition of OPT fibre in FC improved the compressive strength, flexural strength, tensile strength of the FC. OPT's surface roughness was proved beneficial for fibre to matrix interfacial bonding since a coarser surface permit OPT fibre and matrix interlocking in the hardened cement matrix. Based on the results of this study for 600 kg/m3 density, 0.30% volume fraction was the optimum amount added to the FC to achieve the best durability and mechanical properties. While for 1200 kg/m3, 0.45% volume fraction of OPT was the optimum percentage.
Al Rim, K., Ledhem, A., Douzane, O., Dheilly, R. M., Queneudec, M. (1999). Influence of The Wood on The Thermal and Mechanical Performances of Clay-Cement-Wood Composites. Cement and Concrete Composites, 21, pp. 269-276.
ASTM C293 / C293M-16. (2016). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading), ASTM International, West Conshohocken, PA
ASTM C496 / C496M-17. (2017). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA
ASTM C878 / C878M-14a. (2014). Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete, ASTM International, West Conshohocken, PA
BS 12. (1996). Specification for Portland cement. British Standards Institution: 1-18
BS 12390-3. (2011). Testing hardened concrete. Compressive strength of test specimens. British Standard Institution: 1-24
BS 882. (1992). Specification for aggregates from natural sources for concrete. British Standards Institution: 1-14
Elrahman, M. A., El Madawy, M. E., Chung, S. Y., Sikora, P., Stephan, D. (2019). Preparation and characterization of ultra-lightweight foamed concrete incorporating lightweight aggregates. Applied Sciences (Switzerland), 9(7): 1-12
Fu, Y., Wang, X., Wang, L., Li, Y. (2020). Foam Concrete: A State-of-the-Art and State-of-the-art Practice Review. Advances in Materials Science and Engineering, 6153602, 1-25
Hamad, A. J. (2014). Materials, production, properties and application of aerated lightweight concrete. International journal of materials science and engineering, 2(2), 152-157.
Jalal, M. D., Tanveer, A., Jagdeesh, K., Ahmed, F. (2017). Foam concrete. International Journal of Civil Engineering Research, 8(1): 1-14 Hedjazi S. (2019). Compressive Strength of Lightweight Concrete. In Intech Open:1-18
Kamaruddin, S., Goh, W. I., Jhatial, A. A., & Lakhiar, M. T. (2018). Chemical and Fresh State Properties of Foamed Concrete Incorporating Palm Oil Fuel Ash and Eggshell Ash as Cement Replacement. International Journal of Engineering & Technology, 7(4.30), 350
Kim, Y., Jiong, H., Jae, L., & Heeyou, B. (2010). “Mechanical Properties of Fiber Reinforced Lightweight Concrete Containing Surfactant”, Advances in Civil Engineering, 10, 1-9.
Lim, S. K., Tan, C. S., Lim, O. Y., & Lee, Y. L. (2013). Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as filler.
Mahzabin, M. S., Hock, L. J., Hossain, M. S., Kang, L. S. (2018). The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite. Construction and Building Materials, 178: 518-528
Majid, A., Anthony L., Hou, S., Nawawi, C. (2012). Mechanical and dynamic properties of coconut fibre reinforced concrete. Construction and Building Materials, 30, pp. 814-825.
Memon, I. A., Jhatial, A. A., Sohu S., Lakhiar M. T., Hussain Z. (2018). Influence of Fibre Length on the Behaviour of Polypropylene Fibre Reinforced Cement Concrete. Civil Engineering Journal, 4(9): 2124-2131.
Hosseini, M. H., Abdul Awal, A. S. M., & Sam, A. R. M. (2016). Mechanical and thermal properties of prepacked aggregate concrete incorporating palm oil fuel ash. Sadhana, 41(10), 1235-1244.100
Momeen, M., Islam, U., Mo, K. H., & Alengaram, U. J. (2016). Durability properties of sustainable concrete containing high volume palm oil waste materials. Journal of Cleaner Production, 137, 167-177.
Moon, A. S., Varghese, V., Waghmare, S. S. (2015). Foam Concrete as A Green Building Material. International Journal for Research in Emerging Science and Technology, 2(9): 25-32.
Müllera, H. S., Breinera, R., Moffatta, J. S., & Haista, M. (2014). Design and properties of sustainable concrete. Procedia Engineering, 95(Scescm), 290-304
Muthusamy, K., & Zamri, N. A. (2016). Mechanical Properties of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. KSCE Journal of Civil Engineering, 20(4), 1473-1481.
Mydin, M. A. O., Musa, M., Ghani, A. N. A. (2016). Fiber glass strip laminates strengthened lightweight foamed concrete: Performance index, failure modes and microscopy analysis. AIP Conference Proceedings, 2018, 020111
Mydin, O. M. A., Noordin, N. M., Utaberta, N., Yunos, M. Y., Segeranazan, S. (2016). Physical properties of foamed concrete incorporating coconut fibre. Jurnal Teknologi, 78(5), 99-105
Ramamurthy, K., Nambiar, K. E. K., & Indu Siva Ranjani, G. (2009). A classification of studies on properties of foam concrete. Cement and Concrete Composites, 31(6), 388-396.
Sari, K. A. M., Sani, A. R. M. (2017). Applications of Foamed Lightweight Concrete. MATEC Web of Conferences, 97: 1-5.
Serri, E., Mydin, O. M. A., Suleiman, M. Z. (2014). Thermal properties of Oil Palm Shell lightweight concrete with different mix designs. Jurnal Teknologi, 70(1), 155-159
Suhendro, B. (2014). Toward green concrete for better sustainable environment. Procedia Engineering, 95(Scescm), 305-320.
Sumit, C., Sarada, P. K., Aparna, R., Ratan, K. B., Basudam, A., Majumder, S. B. (2013). Improvement of the mechanical properties of jute fiber reinforced cement mortar: A statistical approach. Construction and Building Materials, 38, pp. 776-784.
Tangchirapat, W., & Jaturapitakkul, C. (2010). Strength, drying shrinkage, and water permeability of concrete incorporating ground palm oil fuel ash. Cement and Concrete Composites, 32(10), 767-774.
Thakrele, M. H. (2014). Experimental study on foam concrete. International journal of Civil Structure Environment Infrastructure Engineering Research and development (IJCSEIERD), 4(1-2014), 145-158.
In-Text Citation: (Mydin, 2022)
To Cite this Article: Mydin, M. A. O. (2022). Mechanical Properties of Foamed Concrete with the Addition of Oil Palm Trunk Fibre. International Journal of Academic Research in Business and Social Sciences, 12(1), 253–264.
Copyright: © 2022 The Author(s)
Published by Human Resource Management Academic Research Society (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non0-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode