ISSN: 2222-6990
Open access
Present economic conflicts increase the continues demand for lucrative results that let companies to increase competitive benefit. For this purpose, more establishments look for organizational practices that permit them to enhance their service and/or products features, flawless their procedures, reduce expenses, strengthen the assets productivity and client’s gratification. This have been verified through Lean practices and Six Sigma joined methods in their management and manufacture methods in which, Lean attention mostly on the elimination of waste or non-value added process, and Six Sigma on the control and management of process consistency. The integration of Lean and Six Sigma, which is Lean Six Sigma (LSS) is a systematic approach to decrease or eliminate non-value-added process and optimize process variation. The implementation of LSS is laid on 2 fundamental methodologies, the “Define, Measure, Analyze, Improve, Control” (DMAIC) methodology which focuses on process improvement, and the “Define, Measure, Analyze, Design, Verify” (DMADV) methodology for new process invention. Finding from empirical review reveal that prior studies on LSS to view DMAIC and DMADV practices separately. the concept of how DMAIC and DMADV could be integrated for process improvement and new process invention are remains ambiguous. Hence, this paper aims to review the literature of DMAIC and DMADV with the objective to propose the fundamental concept of integrating both DMAIC and DMADV approach into one standard process improvement and invention methodology.
Anne-Liza, Anne Liza M. R. M., Bas van Manen, Ton van der Laan, Tobie van den Berg, and Gianfranco La Rocca. 2022. “An MBSE-Based Requirement Verification Framework to Support the MDAO Process.” AIAA AVIATION 2022 Forum. doi: 10.2514/6.2022-3722.
Antony, Jiju, E. V Gijo, and S. J. Childe. 2012. “Production Planning & Control The Management of Operations Case Study in Six Sigma Methodology: Manufacturing Quality Improvement and Guidance for Managers Case Study in Six Sigma Methodology: Manufacturing Quality Improvement and Guidance for Managers.” Production Planning & Control 23(8):624–40.
Antony, Jiju, Ronald Snee, and Roger Hoerl. 2017. “Lean Six Sigma: Yesterday, Today and Tomorrow.” International Journal of Quality and Reliability Management 34(7):1073–93. doi: 10.1108/IJQRM-03-2016-0035.
Araman, Hassan, and Yahya Saleh. 2022. “A Case Study on Implementing Lean Six Sigma: DMAIC Methodology in Aluminum Profiles Extrusion Process.” TQM Journal. doi: 10.1108/TQM-05-2021-0154.
Bhuiyan, Nadia, Amit Baghel, and Jim Wilson. 2006. “A Sustainable Continuous Improvement Methodology at an Aerospace Company.” International Journal of Productivity and Performance Management 55(8):671–87. doi: 10.1108/17410400610710206.
Burke, S.E. and Silvestrini, R. .. 2017. The Certified Quality Engineer Handbook. 4th ed. Milwaukee: ASQ Press.
Chang, She I., David C. Yen, Chi Chun Chou, Hsu Che Wu, and Hei Pin Lee. 2012. “Applying Six Sigma to the Management and Improvement of Production Planning Procedure’s Performance.” Total Quality Management and Business Excellence 23(3–4):291–308. doi: 10.1080/14783363.2012.657387.
Corbett, Lawrence M. 2011. “Lean Six Sigma: The Contribution to Business Excellence.” International Journal of Lean Six Sigma 2(2):118–31. doi: 10.1108/20401461111135019.
Deeb, Salah, Hind Bril El Haouzi, Alexis Aubry, and Michele Dassisti. 2018. “A Generic Framework to Support the Implementation of Six Sigma Approach in SMEs.” IFAC-PapersOnLine 51(11):921–26. doi: 10.1016/j.ifacol.2018.08.490.
Drohomeretski, Everton, Sergio E. Gouvea Da Costa, Edson Pinheiro De Lima, and Paula Andrea Da Rosa Garbuio. 2014. “Lean, Six Sigma and Lean Six Sigma: An Analysis Based on Operations Strategy.” International Journal of Production Research 52(3):804–24. doi: 10.1080/00207543.2013.842015.
Duarte, Susana, and V. Cruz-Machado. 2013. “Modelling Lean and Green: A Review from Business Models.” International Journal of Lean Six Sigma 4(3):228–50. doi: 10.1108/IJLSS-05-2013-0030.
Hakimi, Saeid, Seyed Mojib Zahraee, and Jafri Mohd Rohani. 2018. “Application of Six Sigma DMAIC Methodology in Plain Yogurt Production Process.” International Journal of Lean Six Sigma 9(4):562–78. doi: 10.1108/IJLSS-11-2016-0069.
Hardy, Daniel Lee, Saikat Kundu, and Muhammad Latif. 2021. “Productivity and Process Performance in a Manual Trimming Cell Exploiting Lean Six Sigma (LSS) DMAIC – a Case Study in Laminated Panel Production.” International Journal of Quality and Reliability Management 38(9):1861–79. doi: 10.1108/IJQRM-07-2020-0242.
Huang, Chiao Tzu, K. S. Chen, and Tsang Chuan Chang. 2010. “An Application of DMADV Methodology for Increasing the Yield Rate of Surveillance Cameras.” Microelectronics Reliability 50(2):266–72. doi: 10.1016/j.microrel.2009.10.003.
Khan, Sharfuddin Ahmed, M. Affan Badar, and Mohammed Alzaabi. 2020. “Productivity Improvement Using DMAIC in a Caravan Manufacturing Company.” International Journal of Productivity and Quality Management 30(2):234–51. doi: 10.1504/IJPQM.2020.107825.
Kumar, Pramod, Dharmendra Singh, and Jaiprakash Bhamu. 2021. “Development and Validation of DMAIC Based Framework for Process Improvement: A Case Study of Indian Manufacturing Organization.” International Journal of Quality and Reliability Management 38(9):1964–91. doi: 10.1108/IJQRM-10-2020-0332.
Kuncoro, Wuryanti, and Wa Ode Suriani. 2018. “Achieving Sustainable Competitive Advantage through Product Innovation and Market Driving.” Asia Pacific Management Review 23(3):186–92. doi: 10.1016/j.apmrv.2017.07.006.
Long, P., J. Kovach, and D. Ding. 2011. “A Design for Six Sigma Case Study: Creating an IT Change Management System for a Mid-Size Accounting Firm.” International Journal of Engineering, Science and Technology 3(7):56–72. doi: 10.4314/ijest.v3i7.5s.
Mirela, Alexandra, and Cristina Munteanu. 2017. “Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts Alexandra Mirela Cristina MUNTEANU 1.” 2(1):78–89.
Bin Mohd Rafique, Sheikh M. Shahriza. 2013. “The Use of Design for Six Sigma (DFSS) Methodology in Product Design.” Lecture Notes in Engineering and Computer Science 1 LNECS:664–69.
Panayiotou, Nikolaos A., Konstantinos E. Stergiou, and Nikolaos Panagiotou. 2022. “Using Lean Six Sigma in Small and Medium-Sized Enterprises for Low-Cost/High-Effect Improvement Initiatives: A Case Study.” International Journal of Quality and Reliability Management 39(5):1104–32. doi: 10.1108/IJQRM-01-2021-0011.
Patyal, Vishal Singh, Sachin Modgil, and Maddulety Koilakuntla. 2021. “Application of Six Sigma Methodology in an Indian Chemical Company.” International Journal of Productivity and Performance Management 70(2):350–75. doi: 10.1108/IJPPM-03-2019-0128.
Penney, Andy. 1995. “Concurrent Design of Product, Process and Robotic Assembly System.” Assembly Automation 15(2):20–24. doi: 10.1108/01445159510086407.
Pugna, Adrian, Romeo Negrea, and Serban Miclea. 2016. “Using Six Sigma Methodology to Improve the Assembly Process in an Automotive Company.” Procedia - Social and Behavioral Sciences 221:308–16. doi: 10.1016/j.sbspro.2016.05.120.
Purushothaman, Kumaraendran, and Rosmaini Ahmad. 2022. “Integration of Six Sigma Methodology of DMADV Steps with QFD, DFMEA and TRIZ Applications for Image-Based Automated Inspection System Development: A Case Study.” International Journal of Lean Six Sigma 13(6):1239–76. doi: 10.1108/IJLSS-05-2021-0088.
Rifqi, Hanane, Souad Ben Souda, Abdellah Zamma, and Othmane Badder. 2021. “Lean Six Sigma in Agribusiness: A Case Study in a Cookie Production Plant.” International Journal of Engineering Trends and Technology 69(1):56–65. doi: 10.14445/22315381/IJETT-V69I1P209.
Ben Ruben, R., S. Vinodh, and P. Asokan. 2017. “Implementation of Lean Six Sigma Framework with Environmental Considerations in an Indian Automotive Component Manufacturing Firm: A Case Study.” Production Planning and Control 28(15):1193–1211. doi: 10.1080/09537287.2017.1357215.
Saja, Albliwi, Antony Jiju, and Sarina Abdul halim Lim. 2015. “A Systematic Review of Lean Six Sigma for the Manufacturing Industry.” Business Process Management Journal 21(3):665–91.
Sánchez-Rebull, Maria Victòria, Ramon Ferrer-Rullan, Ana Beatriz Hernández-Lara, and Angels Niñerola. 2020. “Six Sigma for Improving Cash Flow Deficit: A Case Study in the Food Can Manufacturing Industry.” International Journal of Lean Six Sigma 11(6):1119–40. doi: 10.1108/IJLSS-12-2018-0137.
Selvi, K., and Rana Majumdar. 2014. “Six Sigma - Overview of DMAIC and DMADV.” International Journal of Innovative Science and Modern Engineering 2(5):16–19.
Seth, Dinesh, Nitin Seth, and Pratik Dhariwal. 2017. “Application of Value Stream Mapping (VSM) for Lean and Cycle Time Reduction in Complex Production Environments: A Case Study.” Production Planning and Control 28(5):398–419. doi: 10.1080/09537287.2017.1300352.
Singh, Bikram Jit, and Harsimran Singh Sodhi. 2014. “Parametric Optimisation of CNC Turning for Al-7020 with RSM.” International Journal of Operational Research 20(2):180–206. doi: 10.1504/IJOR.2014.061769.
Sodhi, Harsimran Singh. 2020. “A Systematic Comparison between DMAIC and DMADV Approaches of Six Sigma.” International Journal of Advance Science and Technology 29(June).
Swarnakar, Vikas, and S. Vinodh. 2016. “Deploying Lean Six Sigma Framework in an Automotive Component Manufacturing Organization.” International Journal of Lean Six Sigma 7(3):267–93. doi: 10.1108/IJLSS-06-2015-0023.
Tampubolon, S., and H. H. Purba. 2021. “Lean Six Sigma Implementation, a Systematic Literature Review.” International Journal of Production Management and Engineering 9(2):125–39. doi: 10.4995/IJPME.2021.14561.
Trehan, Rajeev, Ajay Gupta, and Mohit Handa. 2019. “Implementation of Lean Six Sigma Framework in a Large Scale Industry: A Case Study.” International Journal of Six Sigma and Competitive Advantage 11(1):23–41. doi: 10.1504/IJSSCA.2019.098710.
Trimarjoko, Aris, Humiras Hardi Purba, and Aina Nindiani. 2020. “Consistency of Dmaic Phases Implementation on Six Sigma Method in Manufacturing and Service Industry: A Literature Review.” Management and Production Engineering Review 11(4):34–45. doi: 10.24425/mper.2020.136118.
Trubetskaya, Anna, Olivia Mcdermott, and Anthony Ryan. 2023. “Application of Design for Lean Six Sigma to Strategic Space Management.” 35(9):42–58. doi: 10.1108/TQM-11-2022-0328.
Vinodh, S., S. Vasanth Kumar, and K. E. K. Vimal. 2014. “Implementing Lean Sigma in an Indian Rotary Switches Manufacturing Organisation.” Production Planning and Control 25(4):288–302. doi: 10.1080/09537287.2012.684726.
(Hanoosh & Kowang, 2023)
Hanoosh, J. A. A., & Kowang, T. O. (2023). The Fundamental Concept of Integrates Lean Six Sigma and DMADV Methodologies. International Journal of Academic Research in Business and Social Sciences, 13(10), 1027–1040.
Copyright: © 2023 The Author(s)
Published by HRMARS (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode