Journal Screenshot

International Journal of Academic Research in Business and Social Sciences

Open Access Journal

ISSN: 2222-6990

Consumer Value Considerations: Impact of Remanufactured Products in The Supply Chain Industry

Nurhayati Kamarudin, Nurul Zarirah Nizam, Mohammed Hariri Bakri

http://dx.doi.org/10.6007/IJARBSS/v14-i5/21412

Open access

The success of closed-loop supply chains depends on consumer acceptance of remanufactured products. However, little is known about research on how consumers value such remanufactured products. Thus, the objective of this study is to examine the consumer value considerations of remanufactured products and to determine the most critical consumer value considerations that impact the adoption of remanufactured products in the supply chain industry. Consumer consideration of the value of remanufactured products was measured in terms of perceived benefits (environmental benefits and price advantages) and perceived sacrifice (perceived risks). Next, quantitative methods have been used in carrying out this research. Data were collected on a five-point Likert scale through a questionnaire in an online Google Form and distributed physically to respondents. The data was gathered from 196 respondents located in Malacca. Statistical Packages for Social Sciences (SPSS) and SmartPLS were used to analyze the data. According to the results of this study, there are moderately significant links between perceived benefits and perceived sacrifice with the adoption of remanufactured products. since the perceived benefit on price advantage has the highest correlation value, which is 0.647 and that means it is the most significant and moderate positive relationship between the independent variable and dependent variable. Meanwhile, the third independent variable is perceived sacrifice on perceived risks with the lowest value of 0.574 compared to the other two independent variables. In sum, according to the table above, all three independent variables have a positive and moderate relationship with the dependent variable as the results show a correlation coefficient (r). For future reference, this study is considered a significant contribution to researchers' and practitioners' better understanding of the role of consumers in closed-loop supply chains concerning the acceptance of remanufactured products.

Abd Gani, N. I., Rathakrishnan, M., & Krishnasamy, H. N. (2020). A pilot test for establishing validity and reliability of qualitative interview in the blended learning English proficiency course. J Crit Rev, 7(5), 140-143.
Ali, M., Raza, S. A., Puah, C. H., & Amin, H. (2019). Consumer acceptance toward takaful in Pakistan: An application of diffusion of innovation theory. International Journal of Emerging Markets.
Bányai, T., & Kaczmar, I. (2021). Green Supply Chain. IntechOpen. https://doi.org/10.5772/intechopen.93113
Bhandari, P. (2022). A step-by-step guide to data collection. Scribbr. Retrieved June 5, 2022, from https://www.scribbr.com/methodology/data-collection/
Biecek, P., & Burzykowski, T. (2021). Explanatory model analysis: Explore, explain and examine predictive models. Chapman and Hall/CRC.
Bungatang, B., & Reynel, R. (2021). The Effect of Service Quality Elements on Customer Satisfaction. Golden Ratio of Marketing and Applied Psychology of Business, 1(2), 107-118.
Chen, Y., Wang, J., & Yu, Y. (2019). A study on consumers’ willingness to pay for remanufactured products: a study based on hierarchical regression method. Frontiers in psychology, 10, 2044..
De Giovanni, P., & Zaccour, G. (2022). A selective survey of game-theoretic models of closed-loop supply chains. Annals of Operations Research, 1-40.
Doan, L. T. T., Amer, Y., Lee, S. H., Phuc, P. N. K., & Dat, L. Q. (2019). E-waste reverse supply chain: A review and future perspectives. Applied Sciences, 9(23), 5195.
Jin, M., & Zhou, Y. (2020). Does the remanufactured product deserve the same warranty as the new one in a closed-loop supply chain? Journal of Cleaner Production, 262, 121430.
Kelley, K. (2022). What is Data Analysis: Methods, Process and Types Explained. Simplilearn. Retrieved June 10, 2022, from https://www.simplilearn.com/data-analysis-methods-process-types-article
Kenton, W. (2021). How Supply Chains Work. Investopedia. Retrieved June 1, 2022, from https://www.investopedia.com/terms/s/supplychain.asp
Khara, B., Dey, J. K., & Mondal, S. K. (2020). Sustainable recycling in an imperfect production system with acceptance quality level dependent development cost and demand. Computers & Industrial Engineering, 142, 106300.
Lavoie, A. L., Dentzman, K., & Wardropper, C. B. (2021). Using diffusion of innovations theory to understand agricultural producer perspectives on cover cropping in the inland Pacific Northwest, USA. Renewable Agriculture and Food Systems, 36(4), 384-395.
Liu, C., Chen, J., & Cai, W. (2021). Data-driven remanufacturability evaluation method of waste parts. IEEE Transactions on Industrial Informatics.
Lv, J., Liu, X., & Cheng, S. (2021). The Impact of Remanufactured Products’ Similarity on Purchase Intention of New Products. Sustainability, 13(4), 1825.
MahmoumGonbadi, A., Genovese, A., & Sgalambro, A. (2021). Closed-loop supply chain design for the transition towards a circular economy: A systematic literature review of methods, applications and current gaps. Journal of Cleaner Production, 323, 129101.
Nuseira, M. T., & Aljumahb, A. (2020). Digital marketing adoption influenced by relative advantage and competitive industry: A UAE tourism case study. Marketing, 11(2), 23-37.
Okour, M. K., Chong, C. W., & Fattah, F. A. M. A. (2021). Knowledge management systems usage: application of diffusion of innovation theory. Global Knowledge, Memory and Communication.
Pandey, P., & Pandey, M. M. (2021). Research methodology tools and techniques. Bridge Center.
Panjehfouladgaran, H., & Lim, S. F. W. (2020). Reverse logistics risk management: identification, clustering and risk mitigation strategies. Management Decision.
Phair, D., & Warren, K. (2021). Saunders’ Research Onion: Explained Simply (+ Examples). Grad Coach. https://gradcoach.com/saunders-research-onion/
Purwanto, A., Asbari, M., & Santoso, T. I. (2021). Education Management Research Data Analysis: Comparison of Results between Lisrel, Tetrad, GSCA, Amos, - vcPLS, WarpPLS, and SPSS For Small Samples. Nidhomul Haq: Jurnal Manajemen Pendidikan Islam.
Ravinder, E. B., & Saraswathi, A. B. (2020). Literature Review Of Cronbach alpha coefficient (?) And Mcdonald's Omega Coefficient (?). European Journal of Molecular & Clinical Medicine, 7(6), 2943-2949.
Said, M., & Mustaking, M. (2020). The Effect of Perceived Quality, Perceived Sacrifice and Perceived Risk on Customers’ Perception of Product Value for Electronic Product. PINISI Discretion Review, 1(1), 225-242.
Saidani, M., Yannou, B., Leroy, Y., & Cluzel, F. (2020). Dismantling, remanufacturing and recovering heavy vehicles in a circular economy—Technico-economic and organisational lessons learnt from an industrial pilot study. Resources, conservation and recycling, 156, 104684.
Salehi-Amiri, A., Zahedi, A., Akbapour, N., & Hajiaghaei-Keshteli, M. (2021). Designing a sustainable closed-loop supply chain network for walnut industry. Renewable and Sustainable Energy Reviews, 141, 110821.
Sari, D. P., Masruroh, N. A., & Asih, A. M. S. (2021). Consumer intention to participate in e-waste collection programs: A study of smartphone waste in Indonesia. Sustainability, 13(5), 2759.
Sarstedt, M., & Cheah, J. H. (2019). Partial least squares structural equation modeling using SmartPLS: a software review.
Shabbir, M. S., Mahmood, A., Setiawan, R., Nasirin, C., Arshad, M. A., Khan, S., & Batool, F. (2021). Closed-loop supply chain network design with sustainability and resiliency criteria (Doctoral dissertation, Petra Christian University).
Sharma, R., Jabbour, C. J. C., & de Sousa Jabbour, A. B. L. (2020). Sustainable manufacturing and industry 4.0: what we know and what we don't. Journal of Enterprise Information Management.
Shekarian, E., & Flapper, S. D. (2021). Analyzing the structure of closed-loop supply chains: a game theory perspective. Sustainability, 13(3), 1397.
Shirowzhan, S., Sepasgozar, S. M., Edwards, D. J., Li, H., & Wang, C. (2020). BIM compatibility and its differentiation with interoperability challenges as an innovation factor. Automation in Construction, 112, 103086.
Shrestha, N. (2020). Detecting multicollinearity in regression analysis. American Journal of Applied Mathematics and Statistics, 8(2), 39-42.
Sirk, C. (2020). Diffusion of Innovation: How Adoption of New Tech Spreads. CRM.Org. Retrieved May 31, 2022, from https://crm.org/articles/diffusion-of-innovations
Sitcharangsie, S., Ijomah, W., & Wong, T. C. (2019). Decision makings in key remanufacturing activities to optimise remanufacturing outcomes: a review. Journal of Cleaner Production, 232, 1465-1481.
Tabachnick, B. G., & Fidell, L. S. (2006). Using Multivariate Statistics (5th ed.) [E-book]. Pearson College Div.
Testa, F., Pretner, G., Iovino, R., Bianchi, G., Tessitore, S., & Iraldo, F. (2021). Drivers to green consumption: A systematic review. Environment, development and sustainability, 23(4), 4826-4880.
Van Nguyen, T., Zhou, L., Chong, A. Y. L., Li, B., & Pu, X. (2020). Predicting customer demand for remanufactured products: A data-mining approach. European Journal of Operational Research, 281(3), 543-558.
Wang, Y., Zhu, Q., Krikke, H., & Hazen, B. (2020). How product and process knowledge enable consumer switching to remanufactured laptop computers in circular economy. Technological Forecasting and Social Change, 161, 120275.
Widyastuti, W., Hartini, S., & Artanti, Y. (2020). Revisiting the online shopper's behaviour in Indonesia: The role of trust and perceived benefit. International Journal of Industrial Engineering and Management, 11(4), 226.
Zeng, H., Jiang, D., & Li, Y. (2022). Cooperative and non-cooperative green advertising in the low-carbon supply chain under monopoly or competitive market. Sustainability, 14(15), 9190.
Zhang, X., Hu, J., Sun, S., & Qi, G. (2022). Extended warranty strategy and its environment impact of remanufactured supply chain. International Journal of Environmental Research and Public Health, 19(3), 1526.
Zhu, H., & Deng, F. (2020). How to influence rural tourism intention by risk knowledge during COVID-19 containment in China: Mediating role of risk perception and attitude. International journal of environmental research and public health, 17(10), 3514.

(Kamarudin et al., 2024)
Kamarudin, N., Nizam, N. Z., & Bakri, M. H. (2024). Consumer Value Considerations: Impact of Remanufactured Products in The Supply Chain Industry. International Journal of Academic Research in Business and Social Sciences, 14(5), 483–502.