ISSN: 2222-6990
Open access
Shortage of workforce either local or foreign in oil palm plantation especially harvesting is a well-known fact. This investigation compares three different infield FFB collection method namely: [1] manual (wheelbarrow) with harvesting pole, [2] Mini Tractor With Grabber (MTG) with harvesting pole and [3] mini tractor without grabber (MTWG) with SmartCUT (motorized cutter). A field study of this integrated FFB harvesting and evacuation was governed at Sabah oil palm estate. The total area for this case study was 3000 ha with oil palm age about 10 to 14 years. Through this study, the harvester’s productivity (t/manday) means for MTG, MTWG and manual are 1.35, 0.93 and 0.54 mt respectively. The MTG has a higher output per machine and is highly significant compared to MTWG with SmartCUT. The benefit cost ratio (BCR) are RM4.33 for MTG, RM3.24 for MTWG with SmartCUT and RM2.73 for using manual. Nevertheless MTG has the highest BCR, it has to be tested with other cost benefit analysis. From this findings of study, I would recommend MTG as one of the mechanization for infield collection.
Abd, R. S. (2009). Technologies for Oil Palm Harvesting, Evacuation, and Loose Fruit Collection, Malaysian Palm Oil Board
Ahmad, H., Ariffin, D., and Jalani, S. (1995). Mechanical in-field collection of fresh fruit bunch. "The Way Foward" PORIM. Kuala Lumpur.
Boardman, A. A., Greenberg, D. H., Vining, A. R., and Weimer, D. L. (2006) Cost – Benefit Analysis: Concepts and Practice . (3rd ed.) Upper Saddle River, N.J.: Prentice Hall
Darius, E. P. and Yahya, A. (2013). Mechanized System for infield Oil Palm Fresh Fruit Bunch Collection- transportation. Agricultural Mechanization in Asia, Africa and Latin America vol.44 No 2.
Desa, A. (1996). The Design and Development of an Oil Palm Fresh Fruit Bunch Cutting Device. Proceedings of the Inernational Conference on Agricultural Machinery Engineering 12 – 15 November. Seoul, KOREA.
Donald, E. B. (1974), FMO: Fundamentals of Machine Operation: Tractors John Deere Service Publications
Edward, W. (2009). Farm machinery cost management. Retrieved April 28, 2014 from http://www.extension.iastate.edu/agdm/crops/html/a3-29.html
Farahida, Z., Syahrizan, S., and Muhammad Aliuddin, B. (2017). Fresh fruit bunch quality and oil losses in milling processes as factors that affect the extraction rate of palm oil. International Journal of Agriculture, Forestry and Plantation, Vol. 5 (June) p. 99 - 103
Jayaselan, H.A.J and Desa, A. (2011). Development of a mechanization selection system for oil palm plantation with alternative planting patterns. Journal of oil palm research vol 23 april 2011 p. 990-998.
Jelani, A.R., Maji M.N, Shuib A.R, Mohamed A.T, Din A.K, 2010. An Improved Oil Palm Motorized Cutter - CANTAS Mark II. MPOB information series
Malek. M. (1993). Economic of mechanization in oil palm cultivation in Malaysia. Paper presented to the Technical Advisory Committee. 6-7 December, PORIM. Kuala Lumpur.
Ming, K.K., Chandramohan, D. (2002). Malaysian Palm Oil Industry at Crossroads and its Future Direction. [Journal]. Oil Palm Industry Economic Journal, 2(2).
Yee, N. G., Tamrin, S.B.M., Ippei, M. and Zailina, H. (2013). Ergonomics Observation: Harvesting Tasks at Oil Palm Plantation. J Occup. Health. 55, 405–414.
Razak, J., Desa, A., Ahmad, H., and Johari, J. (1998). Force and Energy Requirements for Cutting Oil Palm Frond. Journal of Oil Palm Research. Volume 10, Number 2, 10 – 24.
Wan Ishak, W. I. (2010). Research And Development Of Oil Palm Harvester Robot At Universiti Putra Malaysia. International Journal of Engineering and Technology, Vol. 7, No.2, pp. 87-94
Yusof, B. (2007). Palm oil production through sustainable plantations. Eur. J. Lipid Sci. Technol. 109,289–295.
In-Text Citation: (Syahlan, Zulkefli, & Bakar, 2018)
To Cite this Article: Syahlan, S., Zulkefli, F., & Bakar, M. A. (2018). An Empirical Study on Infield Collection system in Oil Palm Estate: A Case Study. International Journal of Academic Research in Business and Social Sciences, 8(11), 1657–1665.
Copyright: © 2018 The Author(s)
Published by Human Resource Management Academic Research Society (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode