Journal Screenshot

International Journal of Academic Research in Business and Social Sciences

Open Access Journal

ISSN: 2222-6990

Use of Natural Pozzolanic Material as Partial Replacement Ordinary Portland Cement (OPC) in Concrete

Rahim Ishak, Sinatu Sadiah Shapie, Jau Choy Lai

http://dx.doi.org/10.6007/IJARBSS/v10-i9/7987

Open access

Fly ash is a powder material of burned coal from thermal power stations which produces cementitious and pozzolanic material. Commonly use of fly ash in concrete for building construction contributes conducive environmental and also reduces the effect of pollutant in site project. Therefore, this study was conducted to investigate the use of fly ash as partial replacement of cement in concrete as a mean of producing more environmental friendly concrete. The content of fly ash as partial replacement of ordinary portland cement(OPC) is investigated by weight accordingly in range 0%(without fly ash), 10%, 20% and 30% for grade 25. The chemical composition of fly ash was determine using X-ray Fluorescence (XRF). The scanning electron microscope (SEM) was used to determine particle size, shape and texture of fly ash. The mix proportion of concrete was determine using mix design method according to British Standard. The workability of the fresh concrete mixture was evaluated using slump test while compressive strength of cubes concrete was evaluated at 7, 14, 28 and 56 days. A total of 48 cubes concrete with size 100mmx100mmx100mm were made. The optimum compressive strength at all ages of testing was obtained at 10% replacement. Workability decreased with an increased in replacement percentage of fly ash. The results therefore show that fly ash as pozzolanic materials can be used to partially replace ordinary portland cement in production of concrete.

ASTM C C168: Standard specification for coal fly ash and raw or calcined natural for use in concrete.
British Standard Institution, BS 1881: Part 102:1983. Method for determination of slump, BSi. London
British Standard Institution, BS 1881: Part 116:1983. Method for determination of compressive strength of concrete, BSi. London
British Standard Institution.,BS 882:1992. Specification of aggregates from natural sources for concrete, BSi. London
British Standard Institution.,BS 410:1986. Specification for test sieves, BSi. London
Abu Bakar, A. U., & Baharudin, K.S. (2012). Properties of Concrete Using Tanjung Bin Power Plant Coal Bottom Ash and Fly ash. International Journal of Sustainable Construction Engineering & Technology, 3(2), 56-69.
Choure, A., & Chandak, R. (2017). Experimental Study on Concrete Containing Fly Ash. International Research Journal of Engineering and Technology, 4(2), 202-205.
Englehardt, J. D., & Peng, C. (1995). Pozzolanic Filtration/Solidification of Radionuclides in Nuclear Reactor Cooling Water. Waste Management Journal, 585-592.
Falayi, T., Okonta, F. N., & Ntuli, F. (2017). Desilication of fly ash and development of lightweight construction blocks from alkaline activated desilicated fly ash. International Journal of Environment and Waste Management, 20(3), 233–253. https://doi.org/10.1504/IJEWM.2017.087152
Gourav, K., & Reddy, V. B. V. (2014). Characteristics of compacted fly ash bricks and fly ash brick masonry. Journal of Structural Engineering (India), 41(2), 144–157.
Kanojia, A., Dholia, N., & Rao, V. V. N. P. (n.d.). Optimization of cement & Fine Aggregate wit h “ High Lime Fly Ash & LCMS Fil ing in Concrete .”
Malhotra, V. M., & Bilodeau, A. (2000). High-Volume Fly Ash System. Concrete Solution for Sustainable Development.
Yazici, S., Sahan, H. (2012).Effect of Fly Ash Fineness on The Mechanical Properties of Concrete. Indian Acadeny Sciences Journal, 337(3), 389-403.

In-Text Citation: (Ishak, Shapie, & Lai, 2020)
To Cite this Article: Ishak, R., Shapie, S. S., & Lai, J. C. (2020).Use of Natural Pozzolanic Material as Partial Replacement Ordinary Portland Cement(OPC) in Concrete. International Journal of Academic Research in Business and Social Sciences. 10(9), 1077-1087