ISSN: 2226-6348
Open access
This study identified the effects of using Computer-Assisted Instructional (CAl) package for teaching Metalwork Technology (MWT) at the Nigerian Certificate in Education (Technical) level. Two research questions and two research hypotheses were formulated to guide the study at 0.05 level of significance. The study used post- test only type of quasi experimental research design. Two hundred and eighty students of 200 level NCE (Technical) programme were used as respondents in the study from seven institutions in the North-central geo-political zone of Nigeria. One hundred and forty students each were assigned to the control and experimenta1 groups respectively. Both the control and the experimental groups were taught MWT using the lecture and CAI package methods respectively and administered with Metalwork Technology Achievement Test (MWTAT) in a post-test. The data from the post-test were analyzed using the mean and standard deviation to answer the two research questions and t-test statistics was used to test the two hypotheses in the study. The study found that the subjects in the experimental group performed better than their counterparts in the control group in the post-test with mean score of 23.76. The subjects in the Federal Colleges of Education and Polytechnics performed better than those in the State Colleges of Education and Polytechnics. The study also found significant differences in the performances of the control and the experimental group and between those in the Federal-owned and State- owned institutions. Some recommendations made in the study include Colleges of Educations and Polytechnics offering NCE (Technical) programme should have well equipped computer centers for teaching and learning metalwork technology. Institutions should adopt the CAl package for teaching students metalwork technology.
Adigiin, A.O. (1997). Introduction to vocational technical education (with Principles and methods f teaching skills). Lagos: Raytel Communication.
Akour, A.M. (2009). The effects of Computer- Assisted Instruction on Jordanian college students’ achievement in an introductory computer science course. Electronic .Journal for the Integration of Technology in Education. 5. (1). 17-24.
Ezeliora, B. (2003). Problems affecting the effective use of information technology in the teaching and learning of chemistry in schools in Nigeria. Science Teachers Association of Nigeria. Ibadan: STAN.
Fagbemi, P.O. (2003). Development and validation of self instructional computer-based package for teaching selected units of social studies in the Senior primary schools in Niger state.
An Unpublished M. Tech. Thesis. Federal University of Technology, Minna.
Federal Reub1ic of Nigeria.(2004). National Policy on Education. (4th edition). Lagos: NERDC.
Gambari. A.I. (2003). The design and use of computer aided learning (CAI) Software for individualize learning of physics in senior secondary schools in Nigeria State, Nigeria. An Unpublished M Tech degree Thesis. Federal University of Technology, Minna.
Haddad, W, D. (2013). Is Instructional technology a must for learning? Retrieved from http:www.techknowlogia.pdf.
Ibrahim, A.Y (2Ol2,).Strategies for effective use of audio- visual aids for leaching in Nigeria secondary schools, Minna Journal for Educational Studies ,5 (1), 99-100.
Kara, Z. & Yakar, H. (2009). Effects of computer supported education on the success of students on teaching of Newton‘s Jaw of Motion. World Applied Sciences Journal. 3. (1). 5 1-56. Retrieved from ‘.idosi.org/wasi on 9/4/09
Nnaobi, A.F. (2003).Enhancing student’s performance in using Computer assisted instruction (CAI) in tertiary institutions. Ibadan: Science Teacher’s Association of Nigeria (STAN).
Osisiorna, C.U. (1996). Evaluating vocational technical education programmes for the technological development in Nigeria Another perspective. In Eze. T.l. And Esomonu, N. P.M. (Eds). Social aid economic implications of vocational and technical education for technological development, in Nigeria. Umunze: FCE (T).
Sambo, A.A. (2008). Research methods in education. Ibadan: Stirling — Horden Publishers (Nig) Ltd.
Sanni, S.O. (1 997). Computer instruction in basic statistical concepts: case study of year Undergraduate students in a Nigerian University. An Unpublished Ph. D. Thesis. Abubakar Tafawa Balewa University, Bauchi.
Uko, E.O & Ebute, M.O. (2013). Information and communication technology and teacher education in Nigeria. In A.G Udofia. Ed). Curriculum innovation and educational institution in Nigeria. Jos: Deka Enterprises Nigeria, pp. 16 1-1 62.
Umeoduagu, J.N. (2000). Resources utilization far effective teaching of’ science, technology and mathematics in the new millennium.Ibadan: Science Teachers Association of Nigeria (STAN)
Yalams, S. & Enoch, E.B. (2003). comparative analysis of students performance in metalwork a! NCE Technical) level Within Three States of the North-East Sub region. Journal of League of Researchers in Nigeria, 4 (2). 137-145.
Yilwa, A.V. (1999). An evaluation of Nigerian Junior Secondary School Student is performance in science process skill1’. An Unpublished Ph. D. Thesis. Ahubakar Tafawa Balewa University, Bauchi.
Wajiga, A; Clegg .A; Nachamada, B & Mua’zu, F. I.D. (2006). An Overview of existing practices in ICT and its roles in teaching and learning: The Journey so far in Nigeria. Journal of League of Researchers in Nigeria, 7 (2), 99.
(Chado & Okwori, 2014)
Chado, M. I. D., & Okwori, O. R. (2014). The Effect of Computer-Assisted Instructional Package for Teaching Metalwork Technology (MWT) at Nigeria Certificate in Deucalion (Technical) Level. International Journal of Academic Research in Economics and Management Sciences, 3(6), 64–73.
Copyright: © 2018 The Author(s)
Published by Human Resource Management Academic Research Society (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode