Journal Screenshot

International Journal of Academic Research in Economics and Management Sciences

Open Access Journal

ISSN: 2226-3624

Aerosol-Assisted CVD As The Economically Method to Deposit The Solar Cell, An Overview of The Electrical and Structural Properties

Nurfadzilah Ahmad, Habibah Zulkefle, Puteri Sarah Mohamad Saad, Sivaraju S.S, Nurdiyana Borhan, Wan Abd Al-Qadr Imad Wan Mohtar

http://dx.doi.org/10.6007/IJAREMS/v12-i2/17867

Open access

In the modern era, it is very crucial to utilize the sustainable energy that is abundant in nature especially the solar energy. Due to this reason the research to develop an economically solar cell has been extensively studied. Aerosol-Assisted CVD, an economically developed method to produce the carbon solar call has proven its ability in this area to produce the solar cell. Five samples of pure a-C and nitrogen doped a-C:N were produced, with deposition temperatures ranging from 400°C to 600°C. The current-voltage solar simulator characterization yielded an ohmic contact. Higher conductivity at a-C:N, x10-2 Scm-1 is attributable to a decrease in defects caused by the decrease in spin density gap with nitrogen addition. AFM measurements of structural characteristics at high temperatures reveal an even smoother image as the intense carbon ion bombardment at the thin film's surface increases.

Alibart, F., Durand Drouhin, O., Lejeune, M., Benlahsen, M., Rodil, S. E., & Camps, E. (2008). Evolution of the opto-electronic properties of amorphous carbon films as a function of nitrogen incorporation. Diamond and Related Materials, 17(6), 925–930. https://doi.org/10.1016/J.DIAMOND.2008.01.080
Endrino, J. L., Horwat, D., Anders, A., Andersson, J., & Gago, R. (2009). Impact of Annealing on the Conductivity of Amorphous Carbon Films Incorporating Copper and Gold Nanoparticles Deposited by Pulsed Dual Cathodic Arc. Plasma Processes and Polymers, 6(S1), S438–S443. https://doi.org/10.1002/PPAP.200931003
Hagouel, P. (2005). Semiconductor material and device characterization [Book Review]. IEEE Circuits and Devices Magazine, 15(3), 36–36. https://doi.org/10.1109/MCD.1999.768560
Hou, P. X., Orikasa, H., Yamazaki, T., Matsuoka, K., Tomita, A., Setoyama, N., Fukushima, Y., & Kyotani, T. (2005). Synthesis of nitrogen-containing microporous carbon with a highly ordered structure and effect of nitrogen doping on H2O adsorption. Chemistry of Materials, 17(20), 5187–5193. https://doi.org/10.1021/CM051094K
Hou, X., & Choy, K. L. (2006). Processing and Applications of Aerosol-Assisted Chemical Vapor Deposition. Chemical Vapor Deposition, 12(10), 583–596. https://doi.org/10.1002/CVDE.200600033
Huang, L. Y., & Meng, L. (2007). Effects of film thickness on microstructure and electrical properties of the pyrite films. Materials Science and Engineering: B, 137(1–3), 310–314. https://doi.org/10.1016/J.MSEB.2006.11.029
Kim, H., Jung, J. C., Park, D. R., Baeck, S. H., & Song, I. K. (2007). Preparation of H5PMo10V2O40 (PMo10V2) catalyst immobilized on nitrogen-containing mesoporous carbon (N-MC) and its application to the methacrolein oxidation. Applied Catalysis A: General, 320, 159–165. https://doi.org/10.1016/J.APCATA.2007.01.034
Liu, A., Wu, H., Zhu, J., Han, J., & Niu, L. (2008). Evolution of compressive stress and electrical conductivity of tetrahedral amorphous carbon films with phosphorus incorporation. Diamond and Related Materials, 17(11), 1927–1932. https://doi.org/10.1016/J.DIAMOND.2008.04.008
Miyajima, Y., Nitta, S., Silva, S. R. P., & Zeze, D. A. (2005). Surface induced bulk modifications of amorphous carbon nitride films by post-deposition oxygen and hydrogen plasma treatment. Thin Solid Films, 491(1–2), 161–167. https://doi.org/10.1016/J.TSF.2005.06.033
Mominuzzaman, S. M., Rusop, M., Soga, T., Jimbo, T., & Umeno, M. (2006). Nitrogen doping in camphoric carbon films and its application to photovoltaic cell. Solar Energy Materials and Solar Cells, 90(18–19), 3238–3243. https://doi.org/10.1016/J.SOLMAT.2006.06.037
Nitta, S., Aono, M., Katsuno, T., & Naruse, Y. (2003). Amorphous carbon nitride deposition by nitrogen radical sputtering C+N+O+H. Diamond and Related Materials, 12(2), 219–226. https://doi.org/10.1016/S0925-9635(03)00073-6
Park, Y. S., & Hong, B. (2008). Characteristics of sputtered amorphous carbon films prepared by a closed-field unbalanced magnetron sputtering method. Journal of Non-Crystalline Solids, 354(52–54), 5504–5508. https://doi.org/10.1016/J.JNONCRYSOL.2008.08.007
Podder, J., Rusop, M., Soga, T., & Jimbo, T. (2005). Boron doped amorphous carbon thin films grown by r.f. PECVD under different partial pressure. Diamond and Related Materials, 14(11–12), 1799–1804. https://doi.org/10.1016/J.DIAMOND.2005.07.020
Pradhan, D., & Sharon, M. (2007). Opto-electrical properties of amorphous carbon thin film deposited from natural precursor camphor. Applied Surface Science, 253(17), 7004–7010. https://doi.org/10.1016/J.APSUSC.2007.02.030
Rusop, M., Adhikari, S., Omer, A. M. M., Soga, T., Jimbo, T., & Umeno, M. (2006). Effects of methane gas flow rate on the optoelectrical properties of nitrogenated carbon thin films grown by surface wave microwave plasma chemical vapor deposition. Diamond and Related Materials, 15(2–3), 371–377. https://doi.org/10.1016/J.DIAMOND.2005.07.034
Tan, M., Zhu, J., Han, J., Gao, W., Liu, A., & Han, X. (2008). Raman characterization of boron doped tetrahedral amorphous carbon films. Materials Research Bulletin, 43(2), 453–462. https://doi.org/10.1016/J.MATERRESBULL.2007.02.037
Valentini, L., Kenny, J. M., Carlotti, G., Guerrieri, M., Signorelli, G., Lozzi, L., & Santucci, S. (2001). Effect of nitrogen addition on the elastic and structural properties of amorphous carbon thin films. Thin Solid Films, 389(1–2), 315–320. https://doi.org/10.1016/S0040-6090(01)00879-3
Yang, Z., Xia, Y., Sun, X., & Mokaya, R. (2006). Preparation and hydrogen storage properties of zeolite-templated carbon materials nanocast via chemical vapor deposition: Effect of the zeolite template and nitrogen doping. Journal of Physical Chemistry B, 110(37), 18424–18431. https://doi.org/10.1021/JP0639849/SUPPL_FILE/JP0639849SI20060807_100613.PDF
Zhu, H., Wei, J., Wang, K., & Wu, D. (2009). Applications of carbon materials in photovoltaic solar cells. Solar Energy Materials and Solar Cells, 93(9), 1461–1470. https://doi.org/10.1016/J.SOLMAT.2009.04.006

In-Text Citation: (Ahmad et al., 2023)
To Cite this Article: Ahmad, N., Zulkefle, H., Saad, P. S. M., S.S, S., & Borhan, N. (2023). Aerosol-Assisted CVD As The Economically Method to Deposit The Solar Cell, An Overview of The Electrical and Structural Properties. International Journal of Academic Research in Economics and Management and Sciences, 12(2), 637 – 644.