ISSN: 2226-6348
Open access
Non-Destructive Testing (NDT) method is a method that has a lot of advantages in finding the defects, checking the integrity of the structure or monitoring the structure’s health by maintaining the element in nondestructive mode, can be carried out on site, and can applied to a fully occupied building or historical building that to be protected for heritage wise reason. In order to develop the culture of maintaining the building to achieve sustainability and carrying out forensic engineering when needed, new generation of engineers should be train throughout their engineering program years of study. Thus, it is important for the student to have the exposure of NDT as it will create the interest and awareness of this technique that can be beneficial in the forensic engineering field of work, which is still low in practice and high dependent on the foreign expertise in Malaysia scenario. By looking at the number of advantages, various methods available and numbers of devices to choose from hence various parameters that can be solved with NDT it will give the edge for the future engineers of the country to further explore the forensic engineering discipline using NDT method in the future.
Alwash, M., Breysse, D., Sbartai, Z. M., Szilagyi, K., and Borosnyoi, K. (2017). "Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores." Construction and building materials 140: 354-363.
Aseem, A., Baloch, W. L., Khushnood, R. A., and Mushtaq, A. (2019). "Structural health assessment of fire damaged building using non-destructive testing and micro-graphical forensic analysis: a case study." Case Studies in Construction Materials 11: 258.
Atoyebi, O. D., Ayanrinde, O. P., and Oluwafemi, J. (2019). "Reliability comparison of schmidt rebound hammer as a non-destructive test with compressive strength tests for different concrete mix." Journal of Physics 1378 (3): 32096.
Atoyebi, O. D., and Obanishola, M. S. (2018). "Experimental data on flexural strength of reinforced concrete elements with waste glass particles as partial replacement for fine aggregate." Data in Brief 18: 846–859.
Atoyebi, O. D., Samson, O., Odeyemi, and Joy, A. O. (2018). "Experimental data on the splitting tensile strength of bamboo reinforced lateritic concrete using different culm sizes." Data in brief 20: 1960-1964.
Calvi, M. G., Matteo, M. J., Gerard, O., Nicola, M. R., Daniele, M., Paolo, M. C., and Rui, P. (2019). "Once upon a time in Italy: The tale of the Morandi Bridge." Structural Engineering International 29 (2): 198-217.
Chen, X., Xiaoli, L., and Wang, L. (2019). ""Research on the Construction of Practical Teaching System of Non-Destructive Testing Specialty in Vocational Education." 2nd International Conference on Education Science and Social Development. Atlantis Press. 172-175.
Cheng, Y., and Ping, L. (2002). "Research on the Construction of Practical Teaching." Heilongjiang Higher Education Research 3: 50-52.
Cioni, P., Croce, P., and Walter, S. (2001). "Assessing fire damage to rc elements." Fire safety journal 36 (2): 181-199.
Dwivedi, S. K., Vishwakarma, M., and Soni, A. (2018). "Advances and researches on non destructive testing: A review." Materials Today 5 (2): 3690-3698.
Etemadi, A., and Balkayam, C. (2020). "Collapsed-RC Building Failure Mechanisms with a Forensic Engineering Approach." Journal of Performance of Constructed Facilities 34 (5): 86.
Feng, D., and Maria, Q. F. (2018). "Computer vision for SHM of civil infrastructure: From dynamic response measurement to damage detection–A review." Engineering Structures 1 (156): 105-117.
Gholizadeh, S. (2016). "A review of non-destructive testing methods of composite materials." Procedia structural integrity 1 (1): 50-57.
Hobbs, B., and Kebir, M. T. (2007). "Non-destructive testing techniques for the forensic engineering investigation of reinforced concrete buildings." Forensic science international 167 (2): 167-172.
Ho?a, J., and Krzysztof, S. (2010). "State-of-the-art non-destructive methods for diagnostic testing of building structures—Anticipated development trends." Archives of civil and mechanical engineering 10 (3): 5-18.
Hu, G., Shifeng, and Zhenji, D. (2009). "Research and practice of." China Higher Medical Education 8: 48-50.
Kumavat, H. R., Narayan, R., Chandak, and Ishwar, T. P. (2021). "Factors influencing the performance of rebound hammer used for non-destructive testing of concrete members: A review." Case Studies in Construction Materials 14: 491.
Mirmiran, A. (2001). "Integration of Non?Destructive Testing In Concrete Education." Journal of Engineering Education 90 (2): 219-222.
Ratay, and Robert, T. (2010). Forensic structural engineering handbook. McGraw-Hill Education.
Schabowicz, K., and Hola, J. ( 2010). "State-of-the-art non-destructive methods for diagnostic testing of building structures—Anticipated development trends." Archives of civil and mechanical engineering 10 (3): 5-18.
Schabowicz, K. (2019). "Non-Destructive Testing of Materials in Civil Engineering." Materials 12 (19): 3237. doi:https://doi.org/10.3390/ma12193237.
Verma, B., and Akhtar. (2013). Review of Nondestructive Testing Methods for Condition Monitoring of Concrete Structures
In-Text Citation: (Jamal et al., 2023)
To Cite this Article: Jamal, M. H., Hasbullah, M. A., Rashid, M. R. M., Wee, L. S., Mohammad, S. N., & Zulkifli, C. M. Y. F. bin C. (2023). Non-Destructive Testing (NDT) in Teaching and Learning as Exposure to Forensic to Civil Engineering Student. International Journal of Academic Research in Progressive Education and Development, 12(1), 339–349.
Copyright: © 2023 The Author(s)
Published by HRMARS (www.hrmars.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode