Journal Screenshot

International Journal of Academic Research in Business and Social Sciences

Open Access Journal

ISSN: 2222-6990

Effect of Rubberised Engineered Cementitious Composite (R-ECC) Application as Retrofitting Material on the Structural of Reinforced Concrete Beam-Column Joint Subjected to Static and Cyclic Loading

Nor Wahida Azmin, Mohd Ikmal Fazlan Rozli@Rosli, Kay Dora Abd Ghani, Atiqah Abdul Aziz, Noorliyana Zakaria, Nor Asyiqin Jafri

http://dx.doi.org/10.6007/IJARBSS/v14-i9/23015

Open access

The beam-column junction in reinforced concrete structures was crucial for structural integrity due to extreme shear stress, and failure can potentially destroy a building. This study aims to determine the crack behavior, load versus displacement, ductility, and equivalent viscous damping of beam-column joints before and after retrofitting with Rubberised Engineered Cementitious Composite (R-ECC) under cyclic load test. The study examines the use of scrap rubber tyres as a partial aggregate substitute. Preparation retrofitting work used 5% of R-ECC by using the R-ECC jacketing and patching method. Research shows that R-ECC retrofitting work enhances reinforced concrete structure's crack behavior and structural performances to higher displacement. Additionally, the cyclic resistance of beam-column joints is greatly increased.

Al-Fakih, A., Mohammed, B. S., & Liew, M. S. (2021). On rubberized engineered cementitious composites (R-ECC): A review of the constituent material. Case Studies in Construction Materials, 14. https://doi.org/10.1016/j.cscm.2021.e00536
Alaloul, W. S., Musarat, M. A., A Tayeh, B., Sivalingam, S., Rosli, M. F. Bin, Haruna, S., & Khan, M. I. (2020). Mechanical and deformation properties of rubberized engineered cementitious composite (ECC). In Case Studies in Construction Materials (Vol. 13). Elsevier Ltd. https://doi.org/10.1016/j.cscm.2020.e00385
Aziz, A. A., Rozli, M. I. F., Ghani, K. D. A., Jafri, N. A., & Zakaria, N. (2023). Effects of Pre-Treated Crumb Rubber as Sand Partial Replacement on Compressive Strength of Engineered Cementitious Composites (ECC). Journal of Mechanical Engineering, 20(2), 153–166. https://doi.org/10.24191/jmeche.v20i2.22060
Diyana, N., Hayati, N., Hamid, A., Farhana, I., & Hassan, R. (n.d.). Comparison of Seismic Response Corner Beam-Column Joint with and without Fuse Bars Under In-Plane Lateral Cyclic Loading. 19(1), 1–22.
Maghsoudi, A. A., & Akbarzadeh Bengar, H. (2006). Flexural ductility of HSC members. Structural Engineering and Mechanics, 24(2), 195–212. https://doi.org/10.12989/sem.2006.24.2.195
Nagaraju, A., & Reddy Suda, V. B. (2022). An experimental study on R.C beam-column joints under cyclic loading. Materials Today: Proceedings, 52, 608–616. https://doi.org/10.1016/j.matpr.2021.10.043
Youssf, O., Mills, J. E., & Hassanli, R. (2016). Assessment of the mechanical performance of crumb rubber concrete. Construction and Building Materials, 125, 175–183. https://doi.org/10.1016/j.conbuildmat.2016.08.040

Azmin, N. W., Rozli@Rosli, M. I. F., Ghani, K. D. A., Aziz, A. A., Zakaria, N., & Jafri, N. A. (2024). Effect of Rubberised Engineered Cementitious Composite (R-ECC) Application as Retrofitting Material on the Structural of Reinforced Concrete Beam-Column Joint Subjected to Static and Cyclic Loading. International Journal of Academic Research in Business and Social Sciences, 14(9), 1943–1954.